Light-cured RUBBER-DAM liquid is dedicated for: Gingiva protection during dental treatments: whitening, etching, microabrasion, sandblasting etc. Sealing rubberdam.
Content: Urethane Resins Inorganic Fillers
Method of Use For gingiva protection during dental treatments:
1 - Clean and dry gingiva. 2 - Remove the syringe lock and install the included disposable applicator. 3 - Apply RUBBER-DAM LIQUID along the application area 4-6 mm wide and approximately 1.5-2 mm thick, at the same time overseeing the amount of the preparation being applied 4 - If possible, squeeze RUBBER-DAM LIQUID through interdental space. 5 - Cure the preparation for 15 seconds using polymerization lamp 6 - Conduct the curing process evenly in a scanning motion 7 - Then, proceed the dental treatment 8 - After the treatment is completed, lift off polymerized RUBBER-DAM LIQUID using the instrument on the either side and remove.
Method of Use In order to seal rubber dam:
1 - Isolate the working area (tooth, teeth, alveolus) using RUBBER-DAM. 2 - In order to seal rubber dam, apply the layer of the liquid on the edge of the gingiva and the rubber dam 3 - Cure the preparation for 15 seconds using a polymerization lamp. 4 - Conduct the curing process evenly in a scanning motion 5- Then, proceed the dental treatment. 6 - After the treatment is completed, lift off polymerized RUBBER-DAM LIQUID using the instrument on either side and remove.
